Supported technology/Camera Trap
| Direction | Data provider |
| Platform | Gundi v2 |
| Type | Push integration |
| Data | Events |
TrailGuard sends camera trap detections to EarthRanger through Gundi. Each detection arrives as an EarthRanger event.
What you'll receive
We add details here as we confirm what TrailGuard sends. If you know something we're missing, let us know.
| Positions | No |
| Alerts and events | Yes. Detections, as the event type nightjar_detection_rep. See TrailGuard Event Type. |
| Sensor readings | No |
| Photos and files | Yes |
| Past data | Not documented yet |
How this integration works
This is a push integration. The data provider sends data to Gundi whenever it has something new, on its own schedule. Gundi passes each piece on to your destination as soon as it arrives.
Who's involved
- You create the Route in Gundi and share its API key with the data provider.
- The data provider turns on sending to Gundi with that key.
- Your destination, for example EarthRanger, is where the data shows up.
- Gundi support helps only when the setup badge at the top of this page says so.
Historical data
Gundi passes on whatever the provider sends, old or new. Gundi can't ask the provider for past data, so if you need history, ask the provider whether they can send it again.
When data doesn't show up
Gundi doesn't check the provider for new data; it waits for the provider to send it. If nothing arrives, check with the provider first that they are sending, then look at your Route Activity Logs.
How often data arrives
That depends on how often the provider sends it. Some send each reading right away, others in batches every few minutes or hours.
Prerequisites
TrailGuard
You will need:
- TrailGuard cameras, and a contact at TrailGuard to complete the connection on their side.
Gundi
You will need:
- A Gundi account.
- A Route using the TrailGuard provider, with EarthRanger as the destination (steps below).
EarthRanger
You will need:
- An EarthRanger destination in Gundi for your site.
-
The Nightjar Detection (
nightjar_detection_rep) event type, created before you connect — see TrailGuard Event Type for its fields and a ready-to-apply spec.
Configuration
1. Create the Route in Gundi
1.1 Log in to Gundi and click
Create Route.
1.2 Choose the
TrailGuard provider.
1.3 Select your Workspace and enter a name for this
Route (e.g., “TrailGuard - SiteName”).
1.4 Click
Add destination on the flow map and select your EarthRanger site. Please
consult our guide.
1.5 Save the Route, then select the
data provider node and copy the API key shown under Connect API key.
2. Send the API key to TrailGuard
2.1 Email the Gundi API key and your EarthRanger site name to your TrailGuard contact. They complete the connection on their side.
3. EarthRanger Settings
The following configurations are optional:
3.1. Select the data you want to see in the map.
3.1.1 Log in to EarthRanger as an admin (site.pamdas.org/admin).
3.1.2 Go to
Source Providers.
3.1.3 Select the
Source Provider created for this integration
3.1.4 Click on Subject Details Configuration.
3.1.5 Configure the
additional information you would like to see on the map.
3.2 Assign your Subjects to a Subject Group.
3.3 Rename your Subjects
Please refer to EarthRanger's documentation or contact Support.
Other Camera Trap
| ICUServer | Sentinel (Conservation X Labs) | TrapTagger |
| wpsWatch |
| Back to the integration catalog | Need help setting this up? Contact us |
