Uffizio TRACK-iT

Supported technology/Vehicle Trackers

uffizio-telematics.com/fleet-management-software

Direction Data provider
Data Movement data
Platform Gundi v2
Type Pull integration

Setup You, in the portal

TRACK-iT sends vehicle positions to EarthRanger through Gundi. Gundi checks your TRACK-iT account every 10 minutes, and each vehicle's latest position shows up on the map.

What you'll receive

We add details here as we confirm what TRACK-iT sends. If you know something we're missing, let us know.

Positions Yes, from every vehicle your account can see, named after the vehicle name in TRACK-iT. You can limit this to one company with Company Name, or to some devices with IMEI Numbers, in the Route settings. Positions without a GPS fix, or dated more than a day ahead, are skipped.
Alerts and events No
Sensor readings Speed, heading, altitude, odometer, ignition, GPS and power status, external voltage, temperature, SOS and immobiliser state, plus the address and nearest place TRACK-iT reports.
Photos and files No
Past data No. Each check sends each vehicle's latest position if it is newer than the last one sent, so movement between checks is not sent.

How this integration works

This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.

Who's involved

  • You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
  • The data provider keeps your account and devices active.
  • Your destination, for example EarthRanger, is where the data shows up.
  • Gundi support helps only when the setup badge at the top of this page says so.

Historical data

When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.

When data doesn't show up

Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.

How often data arrives

Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.

Prerequisites

TRACK-iT

You will need:

  • An account (username and password)

EarthRanger

To send movement data to EarthRanger, you will need:

  • A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. 
    Please refer to EarthRanger's documentation or contact Support.
  • A long-lived token for authentication assigned to the user created in the previous step. 
    Please refer to EarthRanger's documentation or contact Support.

Configuration

GUIDES

1. Gundi Connection Settings

1.1 Log in to Gundi.

1.2 Click Create Route.

1.3 Select TRACK-iT from the list of supported technologies

1.4 Configure these fields:

Workspace name

Connection name (e.g., “Track-iT - Account”)

Your username and password

Timezone offset (+2 by default)

Project ID: 37 for Premium or 49 for Standard (37 by default)

Company Name (optional): pulls vehicles for one company only. Leave it empty for all vehicles your account can see.

IMEI Numbers (optional): a comma-separated list of devices to pull. Leave it empty for all devices.

1.10 Click Next.

1.11 Click Add destination on the flow map and select a destination. Please consult our guides.

2. EarthRanger Settings

The following configurations are optional:

2.1. Select the data you want to see in the map.

2.1.1 Log in to EarthRanger as an admin (site.pamdas.org/admin).
2.1.2 Go to Source Providers.
2.1.3 Select the Source Provider created for this integration (e.g., "trackit")

The “Source Provider” is automatically created after Gundi successfully retrieves data from this integration and pushes it to EarthRanger. If you don't find it, please ensure your Route includes a destination, and review the Route Activity Logs for additional details. You should see some records mentioning that Gundi successfully delivered data to EarthRanger.
Important Note:  The integration might take 5 minutes to run. Please verify your connection after this period.

2.1.4 Click on Subject Details Configuration.
2.1.5 Configure the additional information you would like to see on the map.

2.2 Assign your Subjects to a Subject Group.

Please refer to EarthRanger's documentation or contact Support.

Data Provider,  Vehicle Tracking, Pull Integration
July 23, 2026
 

Data Pull Frequency

Approximately every 10 minutes.

Other Vehicle Trackers

Avis Pulse Baytrac BIDTRACK
CarTrack Gesfrota
Back to the integration catalog Need help setting this up? Contact us