digitanimal

Supported technology/Animal Tracking

digitanimal.com

Data Movement data
Type Pull integration
Direction Data provider
Platform Gundi v2

Setup You, in the portal

Digitanimal sends collar positions to EarthRanger through Gundi. Gundi checks your Digitanimal account on a schedule, and the positions show up as tracks on the map.

What you'll receive

We add details here as we confirm what Digitanimal sends. If you know something we're missing, let us know.

Positions Yes, from every device on your Digitanimal account, named by its collar ID.
Alerts and events No. Digitanimal's alarm flag is passed on as a reading, not as an alert.
Sensor readings Temperature and accelerometer readings (x, y, z), plus Digitanimal's alarm and status flags.
Photos and files No
Past data Regular checks send only new positions. Gundi can also fetch a date range of up to 7 days at a time; contact us if you need older data.

How this integration works

This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.

Who's involved

  • You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
  • The data provider keeps your account and devices active.
  • Your destination, for example EarthRanger, is where the data shows up.
  • Gundi support helps only when the setup badge at the top of this page says so.

Historical data

When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.

When data doesn't show up

Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.

How often data arrives

Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.

Prerequisites

Data Source

You will need:

  • Digitanimal username and password.

Data Delivery

EarthRanger

To send data to EarthRanger, you will need:

  • A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. Please refer to EarthRanger's documentation or contact Support.
  • A long-lived token for authentication assigned to the user created in the previous step. Please refer to EarthRanger's documentation or contact Support.

Configuration in Gundi

Login to Gundi.

Click Create Route.

Select Digitanimal.

Configure your Digitanimal username and password.

Set the GMT Offset to the time zone your Digitanimal devices report in (0 for UTC).

Select your Workspace.

Enter a name for this Route under Route Name (e.g, Digitanimal - AccountName)

Click Next.

Click Add destination on the flow map and select a destination. Please consult our guide.

Next Steps

EarthRanger

The following configurations are optional:

1. Select the data you want to see in the map.

1.1. Log in to EarthRanger as an admin.
1.2. Go to Source providers.
1.3. Click on Subject Details Configuration.
1.4. Configure the additional information you would like to see on the map.

2. Rename your Subjects.

3. Assign your Subjects to a Subject Group.

Please refer to EarthRanger's documentation or contact Support.

Data Pull Frequency

Approximately every 10 minutes.

Additional Resources

Other Animal Tracking

Argos Africa Wildlife Tracking (AWT) Advanced Telemetry Systems (or ATS)
Ceres Wild Ecotopia
Back to the integration catalog Need help setting this up? Contact us