Supported technology/Weather Station
metergroup.com/platform/zentra-cloud
| Direction | Data provider |
| Data | Sensor readings (stationary subjects) |
| Platform | Gundi v2 |
| Type | Pull integration |
ZENTRA Cloud sends weather station readings to EarthRanger through Gundi. Gundi checks ZENTRA Cloud on a schedule for each device you list, and each device shows up as a stationary subject with its readings.
What you'll receive
We add details here as we confirm what ZENTRA Cloud sends. If you know something we're missing, let us know.
| Positions | Yes, one stationary subject per device serial number you list in the Route settings, named with the serial number. ZENTRA Cloud doesn't share coordinates, so each device is placed where you set it in Device Locations, or at latitude 0, longitude 0 without one, which EarthRanger doesn't show on the map. |
| Alerts and events | No |
| Sensor readings | Every measurement the device reports, named as ZENTRA Cloud names it (for example air temperature), each with its value, precision and any error flag and description. |
| Photos and files | No |
| Past data | Yes. The first time Gundi sees a device, it fetches the last 24 hours. After that, each check picks up from the last reading sent, up to 1,000 readings per device per check. |
How this integration works
This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.
Who's involved
- You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
- The data provider keeps your account and devices active.
- Your destination, for example EarthRanger, is where the data shows up.
- Gundi support helps only when the setup badge at the top of this page says so.
Historical data
When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.
When data doesn't show up
Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.
How often data arrives
Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.
Prerequisites
Data Source
You will need:
- ZENTRA Cloud authentication token.
- List of device identifiers.
Data Delivery
EarthRanger
To send event data to EarthRanger, you will need:
- A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. Please refer to EarthRanger's documentation or contact Support.
- A long-lived token for authentication assigned to the user created in the previous step. Please refer to EarthRanger's documentation or contact Support.
Configuration in Gundi
Login to Gundi.
Click on Create Route.
Select ZENTRA Cloud.
Under API URL, choose the ZENTRA Cloud server that hosts your devices (US, EU or TAHMO).
Configure your ZENTRA Cloud account token under Token.
Click Add Item and input a device serial number. Do this for as many devices as you have.
Under Device Locations, add each device's serial number with its latitude and longitude. ZENTRA Cloud doesn't share coordinates, so a device without a location is placed at 0,0 and doesn't show on the EarthRanger map.
Select your Workspace.
Enter a name for this Route (e.g., “Zentra Cloud - AccountName”)
Click Next.
Click Add destination on the flow map and select a destination. Please consult our guide.
Next Steps
EarthRanger
The following configurations are optional:
1. Select the data you want to see in the map.
1.1. Log in to EarthRanger as an admin (site.pamdas.org/admin).
1.2. Go to
Source Providers.
1.3. Select the
Source Provider created for this integration (e.g.,
"gundi_zentracloud_UUID")
Please ensure your Route includes a destination, and review the Route Activity Logs for additional details. You should see some records mentioning that Gundi successfully delivered data to EarthRanger.
1.3. Click on Subject Details Configuration.
1.4. Configure the
additional information you would like to see on the map.
2. Configure these Subjects as a “Weather Station”.
3. Assign your Subjects to a Subject Group.
Please refer to EarthRanger's documentation or contact Support.
Data Pull Frequency
Approximately every 5 minutes.
Other Weather Station
| TAHMO | Stevens Connect | Vital Weather |
| OpenWeather |
| Back to the integration catalog | Need help setting this up? Contact us |
