TrackSolid Pro

Supported technology/Animal Tracking

tracksolidpro.com

Direction Data provider
Data Movement data
Platform Gundi v2
Type Pull integration

Setup You, in the portal

TrackSolid Pro sends GPS tracker positions to EarthRanger through Gundi. Gundi checks your TrackSolid Pro account on a schedule, and the positions show up as tracks on the map.

What you'll receive

We add details here as we confirm what TrackSolid Pro sends. If you know something we're missing, let us know.

Positions Yes, from every device on your TrackSolid Pro account, named after the device name (or its IMEI). Each check sends each device's latest position. Positions without a location are skipped. You can set the subject type with Subject type in the Route settings (truck by default).
Alerts and events No
Sensor readings Speed, direction, ignition status, position type and device status, plus satellite count on the daily track history.
Photos and files No
Past data Yes. Once a day at midnight UTC, Gundi fetches each device's full track for the last 24 hours to fill gaps between checks. You can set this from 10 minutes to 7 days with Lookback window (minutes) in the Route settings.

How this integration works

This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.

Who's involved

  • You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
  • The data provider keeps your account and devices active.
  • Your destination, for example EarthRanger, is where the data shows up.
  • Gundi support helps only when the setup badge at the top of this page says so.

Historical data

When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.

When data doesn't show up

Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.

How often data arrives

Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.

Prerequisites

TrackSolid Pro

You will need:

  • TrackSolid Pro Account, Password, “App Key”, “App Secret”
  • TrackSolid Pro Base URL

EarthRanger

To send movement data to EarthRanger, you will need:

  • A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. Please refer to EarthRanger's documentation or contact Support.
  • A long-lived token for authentication assigned to the user created in the previous step. Please refer to EarthRanger's documentation or contact Support.

Configuration

GUIDES

1. Gundi Connection Settings

1.1 Login to Gundi.

1.2 Click on Create Route.

1.3 Select TrackSolid Pro.

1.4 Select your Workspace.

1.5 Enter a name for this Route (e.g., “Vehicle Tracker - AccountName”)

1.6 Configure your TrackSolid Pro account details (User ID, Password, App Key, App Secret, Base URL).

1.7 Click Next.

1.8 Click Add destination on the flow map and select a destination. Please consult our guide.

2. EarthRanger Settings

The following configurations are optional:

2.1. Select the data you want to see in the map.

2.1.1 Log in to EarthRanger as an admin (site.pamdas.org/admin).
2.1.2 Go to Source Providers.
2.1.3 Select the Source Provider created for this integration (e.g., "gundi_tracksolidpro_UUID")

The “Source Provider” is automatically created after Gundi successfully retrieves data from this integration and pushes it to EarthRanger. If you don't find it, please ensure your Route includes a destination, and review the Route Activity Logs for additional details. You should see some records mentioning that Gundi successfully delivered data to EarthRanger.
Important Note:  The integration might take 5 minutes to run. Please verify your connection after this period.

2.1.4 Click on Subject Details Configuration.
2.1.5 Configure the additional information you would like to see on the map.

2.2 Assign your Subjects to a Subject Group.

Please refer to EarthRanger's documentation or contact Support.

How location data is delivered

This integration uses two complementary processes to ensure complete GPS coverage.

Near real-time positions are pulled every 2 minutes. Each run captures the latest known location for every device. This keeps the map current but only records one position per device per run — if a device moves multiple times between polls, only the most recent position is captured immediately.

Full track history is pulled once a day, at midnight UTC. Each run fetches the complete movement history for the last 24 hours for every device. This fills in any positions that were missed between real-time polls, ensuring the full route is eventually recorded.

What this means in practice:

  • The map reflects each device's last known position within ~2 minutes.
  • Complete routes and all intermediate waypoints are available within 24 hours at most.
  • There is no permanent data loss — any position not captured in real time will be backfilled by the next track history run.

Example: a vehicle that makes 10 stops between 8:00 and 8:10 AM will show its 8:10 position on the map by 8:12 AM. All 10 stops will appear in the full track after the next midnight UTC run.

Other Animal Tracking

Argos Africa Wildlife Tracking (AWT) Advanced Telemetry Systems (or ATS)
Ceres Wild digitanimal
Back to the integration catalog Need help setting this up? Contact us